FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Check Programtrouble

Fire-Lite MS-9200UDLS: Check Program

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

An output device is assigned to a software zone that contains no input devices.

Common Causes

  • 1Programming error
  • 2Incomplete zone configuration

Resolution Steps

Use point editing to assign at least one input device (detector or monitor module) to the software zone.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

OFF_NORMAL_MESSAGEThe system is in a state other than normal standby, such as programming or test mode.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.POWER MONA monitor module assigned to power monitoring has detected a loss of power.

Related Questions

How do I set zone types on the MS-5024?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?How do I perform a walk test on the MS-5024 without triggering a full alarm?
All MS-9200UDLS trouble codesMS-9200UDLS panel page