FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
RESET IN SYSTEMmaintenance

Fire-Lite MS-9200UDLS: RESET IN SYSTEM

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

This condition indicates the system is undergoing a reset process to clear latched alarms and troubles, reset power to 4-wire detectors, and perform a lamp test.

Common Causes

  • 1Manual activation of the System Reset key
  • 2Clearing a fire alarm condition
  • 3Clearing a supervisory condition
  • 4Performing a lamp test

Resolution Steps

Pressing and releasing the Reset key turns off all control modules and NACs, temporarily turns off resettable power to 4-wire detectors, causes a RESET IN SYSTEM message to be displayed on the LCD and sends the same message to the printer and history file. It also performs a lamp test by turning on all LEDs (except the Ground LED), piezo sounder and LCD display segments after the Reset key is released.

Manual References(8)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

OFF_NORMAL_MESSAGEThe system is in a state other than normal standby, such as programming or test mode.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.PRINTER FAULTThe panel has lost communication with the local printer or the printer is in an error state.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page