Sensor tampertrouble

Fire-Lite MS-9200UDLS: Sensor tamper

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

This condition indicates that a sensor or expansion module has been tampered with, typically involving the opening of a device enclosure or activation of a tamper switch.

Common Causes

1Sensor tamper
2Expansion module tamper
3Device enclosure opened

Resolution Steps

Clear all initiating devices. Reset the control panel (PRESS the RESET button).

Manual References(2)

1fire-liteMS-9200UDLSInstallation2005p. 110, 181, 131, 153, 184, 112, 108, 188, 7, 182, 107, 183, 5, 185, 3, 37, 8Open

2fire-liteMS-9200UDLSInstallation2015p. 198, 184, 194, 185, 183Open

Field Notes

Loading field notes...

Related Codes

OFF_NORMAL_MESSAGEThe system is in a state other than normal standby, such as programming or test mode.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.POWER MONA monitor module assigned to power monitoring has detected a loss of power.