FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
TOTAL COMM FLTtrouble

Fire-Lite MS-9200UDLS: TOTAL COMM FLT

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

The communicator has failed to report on all available telephone lines.

Common Causes

  • 1Both phone lines disconnected
  • 2DACT hardware failure
  • 3Incorrect central station programming

Resolution Steps

Check both phone lines for dial tone and verify all central station reporting parameters.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.POWER MONA monitor module assigned to power monitoring has detected a loss of power.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.PROCESS MONA monitor module assigned to process monitoring has been activated.

Related Questions

How do I set zone types on the MS-5024?What batteries does the MS-9600 use?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?
All MS-9200UDLS trouble codesMS-9200UDLS panel page