FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
WATERFLOWalarm

Fire-Lite MS-9200UDLS: WATERFLOW

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

A condition indicating that water is flowing through the fire sprinkler system, typically detected by a monitor module or waterflow circuit.

Common Causes

  • 1Activation of a sprinkler head
  • 2Water pressure surges in the sprinkler system
  • 3Manual testing of the inspector's test valve
  • 4Leakage in the sprinkler piping

Resolution Steps

Do not enter the protected area until safe to do so. Clear all initiating devices. Reset the control panel by pressing the RESET button.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

PROCESS MONA monitor module assigned to process monitoring has been activated.RESET IN SYSTEMThis condition indicates the system is undergoing a reset process to clear latched alarms and troubles, reset power to 4-wire detectors, and perform a lamp test.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.UPDOWN FAILUREA failure occurred during a programming upload or download session.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page