AIO Address 1-10 Comm Loss

trouble

Notifier INSPIRE N16

62 views·0 field notes

What This Code Means

Communication failure between the main panel and an AIO peripheral device.

Common Causes

1Wiring break
2Incorrect address setting
3Device power failure

Resolution Steps

Check wiring continuity on the AIO bus and verify the device address matches the panel configuration.

Manual References(1)

1notifierN16Installation2025Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

Cellular Card No ConnectivityThe cellular card is present but cannot connect to the cellular network.SELF TEST FAILEDAn automated diagnostic test on a detector or module has failed.Charger Fail (LSB is PMB address 1-5)The power supply's battery charging circuit is not functioning correctly.AC Failure (LSB is PMB address 1-5)Loss of primary AC power to the power supply module.TRANSMIT/ RECEIVE ERROR ABOVE LIMIT ON LOOP 1-10Excessive data errors detected on the SLC loop, indicating poor signal quality.

Related Questions

How do I wire and configure ACM-30 annunciators on the N16, and what is the maximum number supported?How do I configure the N16 SLC loop for Class A vs. Class B wiring, and what is the maximum loop impedance allowed?What are the common trouble conditions displayed on the N16 touchscreen, and how do I navigate to view them?

All INSPIRE N16 trouble codes INSPIRE N16 panel page