Charger Fail (LSB is PMB address 1-5)

trouble

Notifier INSPIRE N16

62 views·0 field notes

What This Code Means

The power supply's battery charging circuit is not functioning correctly.

Common Causes

1Faulty power supply module
2Blown battery fuse

Resolution Steps

Check battery fuses and connections; if the circuit is still failing, replace the power supply module.

Manual References(1)

1notifierN16Installation2025Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

Cellular Card No ConnectivityThe cellular card is present but cannot connect to the cellular network.SELF TEST FAILEDAn automated diagnostic test on a detector or module has failed.AIO Address 1-10 Comm LossCommunication failure between the main panel and an AIO peripheral device.AC Failure (LSB is PMB address 1-5)Loss of primary AC power to the power supply module.TRANSMIT/ RECEIVE ERROR ABOVE LIMIT ON LOOP 1-10Excessive data errors detected on the SLC loop, indicating poor signal quality.

Related Questions

How do I wire and configure ACM-30 annunciators on the N16, and what is the maximum number supported?How do I configure the N16 SLC loop for Class A vs. Class B wiring, and what is the maximum loop impedance allowed?What are the common trouble conditions displayed on the N16 touchscreen, and how do I navigate to view them?

All INSPIRE N16 trouble codes INSPIRE N16 panel page