Resource Center Tools

Sign In

Sign In

Home
Resources
Trouble Codes
Silent Knight
6820
Co Detector Supervisory Alarm

Resource Center

Browse

Home Questions252 Trouble Codes688 Panels24 Panel Specs24

Learn

Community

Tools

Common Categories

System TroubleSupervisoryGround FaultNACCommunicationPowerDeviceNetwork

Troubleshooting Tip

When diagnosing codes, always check the event history log first. Many trouble conditions are intermittent and tied to environmental factors like temperature or moisture.

Recommended SupplierSponsored

Fire Alarm Parts for Old and New Systems

Panels, detectors, modules and signals
50+ brands, current and legacy
Order by 3 pm ET, ships same day
90-day warranty on every part

Shop Fire Alarm Parts

Can't find what you need?

Resource Center

Questions Panels Trouble Codes Panel Specs NFPA 72-2025

Legal

Privacy Policy Terms of Use Disclaimer DMCA

Cookie Preferences

Company

About Us Blog Glossary Contact Us

© FACP Manuals LLC. All rights reserved.

Built by Will

CO Detector Supervisory Alarm: SK-6820 Trouble Code | Fire Alarm Resource Center

CO Detector Supervisory Alarm

supervisory

Silent Knight SK-6820

71 views·0 field notes

What This Code Means

A Carbon Monoxide detector has reached a supervisory threshold.

Common Causes

1Presence of CO
2Detector fault
3Dirty sensor

Resolution Steps

Evacuate the area if CO is suspected, inspect the detector, and clean or replace if necessary.

Manual References(3)

1silent knight6820Datasheet2018Open

2silent knight6820/6820EVSInstallation2022p. 139, 148, 140, 142, 141Open

3silent knight6820EVSDatasheet2020Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

Printer is out of paper troubleThe system printer has run out of paper.DISABLEA point or circuit has been manually taken out of service, which prevents the activation of notification appliances or alarm initiation from that specific device.GROUND FAULTAn earth ground fault occurs when the panel senses an unexpected flow of current from one or more of its terminals to the earth connection (Terminal 2).Calibration trouble alertA sensor has failed its internal calibration test.MissingA device or module (such as an SLC device or a 5496, 6815, or 5815XL module) is physically connected to the system but is not being recognized by the panel.

Related Questions

How do I program the Silent Knight 6820 via the USB interface, and what software is required?What is the maximum number of devices on the 6820 SLC loop, and how do I expand capacity with a 6815 SLC expander?How do I program zone assignments and custom zone labels on the Silent Knight 6820?

All SK-6820 trouble codes SK-6820 panel page