FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Repeater missing trouble
trouble

Silent Knight SK-6820

54 views·0 field notes

What This Code Means

A repeater module that was previously programmed is no longer communicating with the panel.

Common Causes

  • 1Power loss to repeater
  • 2SBUS wiring break
  • 3Failed repeater module

Resolution Steps

Check power and SBUS connections to the repeater, and replace the module if it is unresponsive.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

GROUND FAULTAn earth ground fault occurs when the panel senses an unexpected flow of current from one or more of its terminals to the earth connection (Terminal 2).Printer is out of paper troubleThe system printer has run out of paper.DISABLEA point or circuit has been manually taken out of service, which prevents the activation of notification appliances or alarm initiation from that specific device.An unexpected SLC device has been IDThe panel has detected a device on the SLC loop that was not programmed into the system.Calibration trouble alertA sensor has failed its internal calibration test.

Related Questions

How do I program the Silent Knight 6820 via the USB interface, and what software is required?What is the maximum number of devices on the 6820 SLC loop, and how do I expand capacity with a 6815 SLC expander?How do I program zone assignments and custom zone labels on the Silent Knight 6820?
All SK-6820 trouble codesSK-6820 panel page