FACP
Manuals
Resource Center
Tools
Ask AI
Sign In
Ask AI
Sign In
Home
•••
Resources
Trouble Codes
Edwards Est
Io1000
006
Resource Center
Browse
Home
Questions
252
Trouble Codes
688
Panels
24
Panel Specs
24
Learn
NFPA 72-2025
Community
Community Wall
Tools
Ask AI
Loop 1 map mismatch
trouble
Edwards EST iO1000
93 views
·
0 field notes
What This Code Means
The loop 1 map in RAM and the loop 1 map in the database do not match
Common Causes
1
Device moved to a different location
2
Device replaced with a different model
3
Wiring changes made without re-mapping
Resolution Steps
Perform a loop map function to update the RAM map or update the panel database to match the physical device layout.
Manual References
(3)
1
edwards est
iO64 and iO1000
Datasheet
2020
p. 1
Open
2
edwards est
iO64 and iO1000
Datasheet
2023
p. 1
Open
3
edwards est
iO64 and iO1000
Installation
2015
p. 186, 160, 61, 187, 189 +2
Open
Getting Loop 1 map mismatch on your iO1000?
Ask TroubleShooter AI for help
→
Field Notes
Loading field notes...
Sign in
to share a field note
Related Codes
Internal fault
The control panel detected an internal hardware or software error
Dialer delivery fail
The dialer failed to deliver a message to the receiver
Dialer line 1 fault
A ground fault or line fault was detected on line 1 of the dialer
Supervisory
A supervisory event is taking place on the control panel, indicating an off-normal condition on a monitored circuit or device.
Loop 1 uncfgrd trouble
A device on loop 1 that is not programmed went into trouble
Related Questions
How do I address devices on the iO1000?
How do I set up the SA-DACT dialer module in the iO1000 for dual-line DACT reporting using Contact ID format?
What Signature series devices are compatible with the iO1000 SLC loop, and can I mix legacy and newer devices on the same loop?
Loop 1 map mismatch: iO1000 Trouble Code | Fire Alarm Resource Center
