FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
POINT_DISABLEmaintenance

Fire-Lite MS-9200UDLS: POINT_DISABLE

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

An addressable point has been manually disabled by the user.

Common Causes

  • 1Maintenance activity
  • 2Testing
  • 3Isolation of a faulty device

Resolution Steps

Re-enable the point through the panel's status or programming menus once maintenance is complete.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

OFF_NORMAL_MESSAGEThe system is in a state other than normal standby, such as programming or test mode.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.PRINTER FAULTThe panel has lost communication with the local printer or the printer is in an error state.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page