ALARMalarm

Honeywell VISTA-128FBP: ALARM

Honeywell VISTA-128FBP·1 view·0 field notes

What This Code Means

Indicates that a burglary or non-fire protection zone has been faulted while the system is armed, or a 24-hour zone has been triggered.

Common Causes

1Opening of a protected door or window while the system is armed
2Movement detected by an interior motion sensor during an armed state
3Activation of a 24-hour burglary or panic zone
4Exceeding the entry delay time without disarming the system

Resolution Steps

Enter your security code and press the OFF [1] key to silence the alarm. To clear the 'Memory of Alarm' and restore the Ready message display, enter your security code and press the OFF [1] key a second time. If the Ready message does not appear, check the displayed zone and remedy the fault (such as closing a window).

Manual References(1)

1honeywellVISTA-128FBPT and VISTA-250FBPTUser Guide2012p. 60, 58, 65, 64, 73, 68, 3, 38, 5, 70, 74, 14, 1, 24, 71, 6, 69, 10Open

Field Notes

Loading field notes...

Related Codes

CHECK or TRBL 974Trouble detected on Dialer 1.CHECKIndicates a trouble condition in the system, which may be associated with specific zones, supervised relays, peripheral devices, or system components like dialers and ground faults.HSENS accompanied by zone numberA smoke detector has a high sensitivity level, which may cause false alarms.CHECK or TRBL 970Trouble detected on Bell 1 Output (Notification Appliance Circuit).AC LOSSThe system has lost primary AC power and the keypad is operating on battery power only.