CHECK or TRBL: VISTA-128FBP Trouble Code | Fire Alarm Resource Center

What This Code Means

Indicates a trouble condition in the system, meaning a problem exists with specific zones, relays, peripheral devices, or system components that may eliminate some protection.

Common Causes

1One or more protection zones are not intact
2Trouble on a supervised relay (6XX, where XX = 01-32)
3Trouble on a peripheral device connected to the keypad terminals (8XX, where XX = 00-30)
4System trouble such as dialers, NACs, or ground faults (9XX, where XX = 00-99)

Resolution Steps

To silence the beeping sound for trouble conditions, press any key. Determine if the zone(s) displayed are intact (this may include Fire and Waterflow type zones) and make them so if they are not. If the problem has been corrected, key an OFF sequence (Code plus OFF) to clear the “CHECK” or “TRBL” display. If the display persists, CALL FOR SERVICE IMMEDIATELY.

Manual References(1)

1honeywellVISTA-128FBPT and VISTA-250FBPTUser Guide2012p. 60, 58, 65, 24, 69 +14Open

Related Codes

CHECK or TRBL 974Trouble detected on Dialer 1.972 Earth Ground FaultA system trouble indicating that an earth ground fault has been detected. This condition may eliminate some of the system's protection.CHECK or TRBL 997Polling Loop Short circuit detected.ALARMIndicates that a burglary or non-fire protection zone has been faulted while the system is armed, or a 24-hour zone has been triggered.CHECK or TRBL 970Trouble detected on Bell 1 Output (Notification Appliance Circuit).

Honeywell VISTA-128FBP

What This Code Means

Common Causes

Resolution Steps

Manual References(1)

Field Notes

Related Codes

Related Questions