FIREalarm

Honeywell VISTA-128FBP: FIRE

Honeywell VISTA-128FBP·1 view·0 field notes

What This Code Means

A fire emergency has been detected by smoke or heat detectors, or has been manually initiated via a panic key.

Common Causes

1Smoke or heat detectors automatically sensing a fire condition
2Manual initiation via a panic key assigned as FIRE emergency
3Smoke or heat producing objects in the vicinity of detectors
4Dust accumulation on smoke detectors

Resolution Steps

Silence the keypad by entering the user code and pressing the OFF key. If no flames or smoke are apparent, investigate the cause. If smoke is present in the detector, clear it by fanning the detector for about 30 seconds. To clear the display and reset the alarm from memory, enter the user code and press the OFF key a second time.

Manual References(1)

1honeywellVISTA-128FBPT and VISTA-250FBPTUser Guide2012p. 60, 58, 64, 75, 65, 3, 73, 1, 68, 57, 74, 5, 14, 38, 70, 62, 24Open

Field Notes

Loading field notes...

Related Codes

CHECK or TRBL 970Trouble detected on Bell 1 Output (Notification Appliance Circuit).FIRE or ALARM accompanied by zone descriptorIndicates that an alarm occurred while the system was armed.CHECK or TRBL 6XXIndicates a trouble condition on a supervised relay where XX is the relay number (01-32).FIRE DRILL ACTIVEThe system is currently in Fire Drill test mode.CHECK or TRBLIndicates a trouble condition in the system, meaning a problem exists with specific zones, relays, peripheral devices, or system components that may eliminate some protection.