FACP
Manuals
Resource Center
Tools
Ask AI
Sign In
Ask AI
Sign In
Home
•••
Resources
Trouble Codes
Honeywell
Vista 128fbp
Memory Of Alarm
Resource Center
Browse
Home
Questions
252
Trouble Codes
688
Panels
24
Panel Specs
24
Learn
NFPA 72-2025
Community
Community Wall
Tools
Ask AI
FIRE or ALARM accompanied by zone descriptor: VISTA-128FBP Trouble Code | Fire Alarm Resource Center
FIRE or ALARM accompanied by zone descriptor
alarm
Honeywell VISTA-128FBP
63 views
·
0 field notes
What This Code Means
Indicates that an alarm occurred while the system was armed.
Common Causes
1
Previous zone violation
2
Fire or Burglary event
Resolution Steps
Note the zone number, then enter User Code + OFF to clear the memory and restore the Ready display.
Manual References
(1)
1
honeywell
VISTA-128FBPT and VISTA-250FBPT
User Guide
2012
p. 60, 68, 3, 65, 58 +3
Open
Getting FIRE or ALARM accompanied by zone descriptor on your VISTA-128FBP?
Ask TroubleShooter AI for help
→
Field Notes
Loading field notes...
Sign in
to share a field note
Related Codes
CHECK or TRBL 974
Trouble detected on Dialer 1.
972 Earth Ground Fault
A system trouble indicating that an earth ground fault has been detected. This condition may eliminate some of the system's protection.
CHECK or TRBL 997
Polling Loop Short circuit detected.
ALARM
Indicates that a burglary or non-fire protection zone has been faulted while the system is armed, or a 24-hour zone has been triggered.
CHECK or TRBL 970
Trouble detected on Bell 1 Output (Notification Appliance Circuit).
Related Questions
I'm getting CHECK or TRBL 974 on my Honeywell VISTA-128FBP. What should I check?
I'm getting 972 Earth Ground Fault on my Honeywell VISTA-128FBP. What should I check?
What zone types are supported on the VISTA-128FBP and how are fire detector zones wired differently from supervisory zones?
