AC failuretrouble

Kidde FX-10: AC failure

Kidde FX-10·2 views·0 field notes

What This Code Means

Primary AC power to the control panel has been lost.

Common Causes

1Tripped circuit breaker
2Blown AC fuse
3Local power outage

Resolution Steps

Check the AC circuit breaker supplying the panel. If power is present, disconnect batteries and check the 5A fuse on the AC terminal block; replace if necessary with the same type and rating.

Manual References(2)

1kiddeFX-5 and FX-10 SeriesOperating Instructions2017p. 1Open

2kiddeFX-5 and FX-10Installation2017p. 113, 86, 111, 65, 90, 3, 89, 115Open

Field Notes

Loading field notes...

Related Codes

Battery badThe panel has detected that the standby batteries are low or failing a load test.Battery missingThe control panel cannot detect the presence of standby batteries.Ground faultA circuit has come into contact with earth ground.DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.DACT Delivery TRThe dialer failed to deliver a message to the central monitoring station receiver.