Kidde

FX-10

The Kidde FX-10 is a conventional fire alarm control panel supporting up to 10 zones. Suitable for medium commercial applications requiring zone-based detection.

10 manuals22 trouble codesModels: FX-10, FX-10R, FX-10RD

Specifications

SLC Loops

N/A (Conventional)

Panel Type

Conventional

IDC Zones

10 Class B (or 5 Class A)

NAC Circuits

4 Class B / 2 Class A

Battery (Ah)

7-24

Annunciator

Yes

Manuals

FX-5 and FX-10

InstallationOperationsProgramming2017

FX-64 and FX-1000

InstallationOperationsProgramming2021

Trouble Codes

View all 22 →

AC failurePrimary AC power to the control panel has been lost.AUX Power TroubThe panel detected a trouble condition or overload on the auxiliary power circuit.Battery badThe panel has detected that the standby batteries are low or failing a load test.Battery missing

Related Questions

How do I set up zone-specific NAC activation on the FX-10 so that only certain horns/strobes activate for specific zones?How do I configure the Kidde FX-10 to pair IDC zones for Class A wiring?How do I convert the FX-10 NAC circuits from Class B to Class A?How do I wire and program the FX-10 onboard relays for connection to a building management system?

All Kidde manuals →All FX-10 trouble codes →Ask TroubleShooter AI →

FX Series Conventional Fire Alarms

Datasheet2018

FX-64 and FX-1000

Datasheet2018

Conventional Fire Alarm Systems

Datasheet2020

FX Series Conventional Fire Alarm

Datasheet2016

FX Series

Datasheet2021

FX-5 and FX-10 Series

Operating Instructions2017

FX-64 and FX-1000

Datasheet2025

FX-10RD, FX-10R, FX-5RD, and FX-5R

Datasheet2025

Manuals That Reference This Model (4)

Intelligent Fire Alarm SystemsDatasheet2021 Intelligent Fire Alarm SystemsDatasheet2016 FX-SLC1Installation2017 FX Series ConventionalDatasheet2021

The control panel cannot detect the presence of standby batteries.

Charger troubleThe panel's battery charging circuit is malfunctioning.

DACT Configuration TRBLThe dialer module is not programmed or contains unverified configuration changes.

DACT Delivery TRThe dialer failed to deliver a message to the central monitoring station receiver.

DACT Line 1 TrblA ground fault or line fault has been detected on the primary telephone line.

DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.

Ground faultA circuit has come into contact with earth ground.

What is the process to perform a one-person walk test on the FX-10?