Kidde FX-10

57 views·0 field notes

What This Code Means

The dialer failed to deliver a message to the central monitoring station receiver.

Common Causes

1Incorrect account programming
2Wrong receiver phone number
3Communication format mismatch

Resolution Steps

Verify dialer programming including account numbers and phone numbers. Ensure the receiver is compatible with the programmed format (Contact ID or 4/2).

Manual References(2)

1kiddeFX-5 and FX-10 SeriesOperating Instructions2017p. 1Open

2kiddeFX-5 and FX-10Installation2017p. 113, 86, 111, 65, 90 +3Open

Field Notes

Loading field notes...

Related Codes

Zone troubleAn open or short circuit condition exists on an Initiating Device Circuit (IDC).Ground faultA circuit has come into contact with earth ground.DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.AC failurePrimary AC power to the control panel has been lost.Battery badThe panel has detected that the standby batteries are low or failing a load test.