Default database. Please program.

trouble

Notifier INSPIRE N16

61 views·0 field notes

What This Code Means

The panel is running on a factory default database and has not been configured.

Common Causes

1New panel installation
2Memory wipe/reset

Resolution Steps

Upload the site-specific configuration database using the programming tool.

Manual References(1)

1notifierN16Installation2025Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

Cellular Card No ConnectivityThe cellular card is present but cannot connect to the cellular network.SELF TEST FAILEDAn automated diagnostic test on a detector or module has failed.AIO Address 1-10 Comm LossCommunication failure between the main panel and an AIO peripheral device.Charger Fail (LSB is PMB address 1-5)The power supply's battery charging circuit is not functioning correctly.TRANSMIT/ RECEIVE ERROR ABOVE LIMIT ON LOOP 1-10Excessive data errors detected on the SLC loop, indicating poor signal quality.

Related Questions

How do I wire and configure ACM-30 annunciators on the N16, and what is the maximum number supported?How do I configure the N16 SLC loop for Class A vs. Class B wiring, and what is the maximum loop impedance allowed?What are the common trouble conditions displayed on the N16 touchscreen, and how do I navigate to view them?

All INSPIRE N16 trouble codes INSPIRE N16 panel page