TAMPERsupervisory

Notifier NFW2-100: TAMPER

Notifier NFW2-100·0 views·0 field notes

What This Code Means

A condition indicating that a monitored component, such as a sprinkler valve, has been moved from its normal state.

Common Causes

1Sprinkler valve tamper condition
2Activation of a tamper switch on a monitored device
3Monitor module circuit activation

Resolution Steps

Press the Acknowledge/Step or Alarm Silence key to silence the pulsing piezo and change the Supervisory LED from flashing to steady. Press the Reset key to turn off the LED once all supervisory alarms have been cleared.

Manual References(1)

1notifierNFW2-100Installation2005p. 127, 172, 2, 33, 149, 3, 36, 5, 124, 104, 107, 109, 126, 169, 181, 106, 34, 177, 6, 32Open

Field Notes

Loading field notes...

Related Codes

AC_FAILThe control panel has lost primary AC power.TEST FIndicates a detector has failed the automatic test operation of its sensing chamber and electronics.NAC 1 FAULTA fault condition (open or short) on Notification Appliance Circuit 1.MEMORY FAULTInternal system memory error.Active SupervisoryA condition indicating that a monitored system component is in an off-normal state, such as a sprinkler valve tamper condition.