FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
BATT CHG CUR = XX.X AMPSmaintenance

Siemens MXL: BATT CHG CUR = XX.X AMPS

Siemens MXL·1 view·0 field notes

What This Code Means

Display of the current being used to charge the system batteries.

Common Causes

  • 1Recharging after power loss
  • 2Maintenance float charging

Resolution Steps

Monitor the charging current to ensure batteries are recharging correctly after a discharge event.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

AC VOLTAGE = X VOLTSDisplay of the current AC input voltage to the system power supply.Pre-alarmA smoke detector has reached a threshold near its alarm point but has not yet reached full alarm status.NN:MMM-DDD [custom message] ACK [trouble type] IN TRBA general system trouble has occurred, indicating a fault that may prevent the system from operating correctly.GROUND FAULT IS OKThe system ground fault test has passed and no ground faults are currently detected.Tamper SwitchThis is a security-type message for the tamper switch on the SMB-2 board when the system is selected for UL 1076 operation.

Related Questions

What does 'Loop Trouble' mean on the MXL and how do I clear it?Does the MXL support voice evacuation, and what hardware is required?How many addressable devices does the MXL support per SLC loop, and what is the total system point capacity?
All MXL trouble codesMXL panel page