FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
NO SUPERVISORY EXISTSmaintenance

Siemens MXL: NO SUPERVISORY EXISTS

Siemens MXL·0 views·0 field notes

What This Code Means

The user attempted to access the supervisory list or acknowledge menu, but there are no active supervisory conditions.

Common Causes

  • 1System is clear
  • 2Supervisory condition was previously reset

Resolution Steps

No action required.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Pre-alarmA smoke detector has reached a threshold near its alarm point but has not yet reached full alarm status.NN:MMM-DDD [custom message] ACK [trouble type] IN TRBA general system trouble has occurred, indicating a fault that may prevent the system from operating correctly.GROUND FAULT IS MINUSThe system has detected a negative ground fault on the field wiring.Tamper SwitchThis is a security-type message for the tamper switch on the SMB-2 board when the system is selected for UL 1076 operation.GROUND FAULT IS OKThe system ground fault test has passed and no ground faults are currently detected.

Related Questions

What modules are available to expand the MXL beyond its base configuration, and what is the maximum supported cabinet and loop count?What does 'Loop Trouble' mean on the MXL and how do I clear it?How do I program the MXL using CSGM software?
All MXL trouble codesMXL panel page