AUX Power Troub: FX-10 Trouble Code | Fire Alarm Resource Center

What This Code Means

The panel detected a trouble condition or overload on the auxiliary power circuit.

Common Causes

1Short circuit in field wiring
2Excessive current draw from peripherals
3Faulty auxiliary device

Resolution Steps

Disconnect field wiring from the AUX power terminals to see if the trouble clears. Verify that the total current draw does not exceed the panel's rated capacity.

Manual References(2)

1kiddeFX-5 and FX-10 SeriesOperating Instructions2017p. 1Open

2kiddeFX-5 and FX-10Installation2017p. 113, 86, 111, 65, 90 +3Open

Related Codes

Zone troubleAn open or short circuit condition exists on an Initiating Device Circuit (IDC).Ground faultA circuit has come into contact with earth ground.DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.AC failurePrimary AC power to the control panel has been lost.NAC disabledA Notification Appliance Circuit has been manually taken out of service.

Kidde FX-10

What This Code Means

Common Causes

Resolution Steps

Manual References(2)

Field Notes

Related Codes

Related Questions