FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
IPGateway Trouble
trouble

Edwards EST iO1000

56 views·0 field notes

What This Code Means

IP Gateway configuration is invalid

Common Causes

  • 1Incorrect IP address assigned
  • 2Gateway settings do not match network
  • 3Missing DNS or subnet mask

Resolution Steps

Access the IP Gateway configuration menu and verify all network settings (IP, Subnet, Gateway) are correct for the local network.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Internal faultThe control panel detected an internal hardware or software errorLoop 1 uncfgrd troubleA device on loop 1 that is not programmed went into troubleDialer line 1 faultA ground fault or line fault was detected on line 1 of the dialerSupervisoryA supervisory event is taking place on the control panel, indicating an off-normal condition on a monitored circuit or device.NAC 1 troubleAn open or short was detected on NAC 1 or there is a problem with the EOL

Related Questions

How do I address devices on the iO1000?How do I configure the iO1000 NAC circuits for Class A wiring instead of the default Class B?What Signature series devices are compatible with the iO1000 SLC loop, and can I mix legacy and newer devices on the same loop?
All iO1000 trouble codesiO1000 panel page