CHECK: VISTA-128FBP Trouble Code | Fire Alarm Resource Center

What This Code Means

Indicates a trouble condition in the system, which may be associated with specific zones, supervised relays, peripheral devices, or system components like dialers and ground faults.

Common Causes

1A problem exists with one or more protection zones (e.g., zone not intact)
2Trouble on a supervised relay (displayed as 6XX)
3Trouble on a peripheral device connected to keypad terminals (displayed as 8XX)
4System trouble such as dialer failure, NAC trouble, or ground fault (displayed as 9XX)
5A problem that eliminates some protection (accompanied by 'CALL SERVICE')

Resolution Steps

Press any key to silence the beeping. Determine if the zone(s) displayed are intact and make them so if they are not. If the problem has been corrected, key an OFF sequence (Code plus OFF) to clear the display. If the display persists, CALL FOR SERVICE IMMEDIATELY.

Manual References(1)

1honeywellVISTA-128FBPT and VISTA-250FBPTUser Guide2012p. 60, 74, 64, 58, 65 +14Open

Related Codes

CHECK or TRBL 974Trouble detected on Dialer 1.972 Earth Ground FaultA system trouble indicating that an earth ground fault has been detected. This condition may eliminate some of the system's protection.CHECK or TRBL 997Polling Loop Short circuit detected.ALARMIndicates that a burglary or non-fire protection zone has been faulted while the system is armed, or a 24-hour zone has been triggered.CHECK or TRBL 970Trouble detected on Bell 1 Output (Notification Appliance Circuit).

Honeywell VISTA-128FBP

What This Code Means

Common Causes

Resolution Steps

Manual References(1)

Field Notes

Related Codes

Related Questions