FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
IDC disabledmaintenance

Kidde FX-10: IDC disabled

Kidde FX-10·0 views·0 field notes

What This Code Means

An Initiating Device Circuit has been manually taken out of service.

Common Causes

  • 1Zone maintenance
  • 2Frequent false alarms on a specific zone
  • 3Construction in the area

Resolution Steps

Press the corresponding IDC disable button to re-enable the zone once maintenance is complete.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

AC failurePrimary AC power to the control panel has been lost.DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.Battery missingThe control panel cannot detect the presence of standby batteries.Ground faultA circuit has come into contact with earth ground.Battery badThe panel has detected that the standby batteries are low or failing a load test.

Related Questions

How do I configure the Kidde FX-10 to pair IDC zones for Class A wiring?What is the difference between Abort Mode 1 (UL 864) and Abort Mode 3 (IRI) on the Aegis 2.0?How do I set up zone-specific NAC activation on the FX-10 so that only certain horns/strobes activate for specific zones?
All FX-10 trouble codesFX-10 panel page