Internal Comm TR: FX-10 Trouble Code | Fire Alarm Resource Center

What This Code Means

The panel has lost communications with an internal component, typically the F-DACT1(F) dialer.

Common Causes

1Loose ribbon cable
2Faulty DACT module
3Incomplete module detection

Resolution Steps

Check the connection between the main control board and the DACT module. Ensure the module is properly seated and the panel has been configured to detect it.

Manual References(2)

1kiddeFX-5 and FX-10 SeriesOperating Instructions2017p. 1Open

2kiddeFX-5 and FX-10Installation2017p. 113, 86, 111, 65, 90 +3Open

Related Codes

Zone troubleAn open or short circuit condition exists on an Initiating Device Circuit (IDC).Ground faultA circuit has come into contact with earth ground.DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.AC failurePrimary AC power to the control panel has been lost.NAC disabledA Notification Appliance Circuit has been manually taken out of service.

Kidde FX-10

What This Code Means

Common Causes

Resolution Steps

Manual References(2)

Field Notes

Related Codes

Related Questions