FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Remote AC fail
trouble

Kidde FX-10

47 views·0 field notes

What This Code Means

A remote power supply or module has lost its primary AC power.

Common Causes

  • 1Local power failure at remote location
  • 2Tripped breaker for remote power supply

Resolution Steps

Check the AC power source at the location of the remote power supply or annunciator.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Zone troubleAn open or short circuit condition exists on an Initiating Device Circuit (IDC).Ground faultA circuit has come into contact with earth ground.DACT Line 2 TrblA ground fault or line fault has been detected on the secondary telephone line.AC failurePrimary AC power to the control panel has been lost.DACT Delivery TRThe dialer failed to deliver a message to the central monitoring station receiver.

Related Questions

How do I set up zone-specific NAC activation on the FX-10 so that only certain horns/strobes activate for specific zones?How do I configure the Kidde FX-10 to pair IDC zones for Class A wiring?How do I convert the FX-10 NAC circuits from Class B to Class A?
All FX-10 trouble codesFX-10 panel page