FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
IDNet Device: M#-# Battery Faulttrouble

Simplex 4010ES: IDNet Device: M#-# Battery Fault

Simplex 4010ES·1 view·0 field notes

What This Code Means

This trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.

Common Causes

  • 1Battery failure on the 4009 device
  • 2Disconnected or depleted battery at the 4009 extender
  • 3Faulty battery charger circuit within the 4009 device

Resolution Steps

Identify the 4009 device indicated by the IDNet address provided in the trouble message and check the battery and charging circuit at that specific device.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.Maintenance Switch SupervisoryA maintenance switch has been activated to allow the system to be tested or serviced without actuating fire suppression.FIRE MONITOR ZONE OPEN CIRCUIT TROUBLEA trouble message used to indicate that the FACP is impaired due to a break in the electrical path of a circuit.[Point Label] DISABLED TROUBLEA point or zone has been manually inhibited from reporting alarm conditions or other status changes, typically because the device is malfunctioning or undergoing maintenance.Almost DirtyThe TrueAlarm sensor is accumulating dust and is approaching the threshold where it will require cleaning.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4100ES using the Earth Fault Search?How do I troubleshoot a ground fault on the Simplex 4010ES?
All 4010ES trouble codes4010ES panel page