[Point Label] DISABLED TROUBLE: 4010ES Trouble Code

What This Code Means

A point or zone has been manually inhibited from reporting alarm conditions or other status changes, typically because the device is malfunctioning or undergoing maintenance.

Common Causes

1Manual intervention by an operator to inhibit alarm reporting for a malfunctioning point
2A device remains in alarm and no alarm condition exists
3A point is disabled during maintenance or testing
4A device or circuit has failed and is disabled until repair

Resolution Steps

Select the point. Press the Disable or Enable key. Press the ENTER key to carry out the action. When you enable the point again, the trouble clears.

Manual References(1)

1simplex4010ESOperations2016p. 17, 40, 18, 25, 3 +5Open

Related Codes

4009 NAC Power FailureOne or more NACs on a 4009 IDNet NAC Extender has a power failure.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.City DisconnectThe city circuit has been disconnected.Battery Standby TroubleThe system backup batteries are low, missing, or failed.

Simplex 4010ES

What This Code Means

Common Causes

Resolution Steps

Manual References(1)

Field Notes

Related Codes

Related Questions