AR4 Open Circuit Trouble Ontrouble

Fenwal FENWALNET 6000: AR4 Open Circuit Trouble On

Fenwal FENWALNET 6000·1 view·0 field notes

What This Code Means

An open circuit has been detected in the field wiring connected to TB6, which is configured as a release circuit.

Common Causes

1Discontinuity in Combo-2 field wiring
2Loose terminal connection
3Broken conductor

Resolution Steps

Look for discontinuity in Combo-2 field wiring. Refer to Paragraph 2-10.2.

Manual References(1)

1fenwalFENWALNET 6000Installation2004p. 16, 25, 170, 11, 175, 14, 13, 15, 210Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

Outputs Silenced MessageThe notification appliances or release outputs have been manually deactivated by an operator.Typical Device Not Registered MessageA device is present on the signaling line circuit but is not recognized in the system configuration.AR1 Short Circuit Trouble OnA short circuit has been detected in the field wiring connected to the main circuit board terminal TB12.Addr Line Volt Fault On Device TypeA failure of the DC to DC converter in the device at the specified address, or insufficient voltage reaching the device.SG1 Open Circuit Trouble OnAn open circuit has been detected in the Notification Appliance Circuit 1 (NAC1) connected to TB5.

Related Questions

What Fenwal-compatible detectors and modules can be used on the FENWALNET 6000 SLC loop?What do common FENWALNET 6000 trouble codes such as Ground Fault, Open Circuit, and Device Failure indicate?What are the pre-discharge and discharge sequences on the FenwalNET-6000 suppression system, and how does the abort function work?

All FENWALNET 6000 trouble codes FENWALNET 6000 panel page