FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Zone 1 disabledtrouble

Fire-Lite MS-5024: Zone 1 disabled

Fire-Lite MS-5024·2 views·0 field notes

What This Code Means

A specific initiating zone has been manually deactivated by a user, preventing it from triggering alarms or reporting troubles.

Common Causes

  • 1Manual deactivation by a user via the keypad
  • 2Maintenance or testing being performed on the specific zone
  • 3Intentional bypass to prevent false alarms from faulty field devices

Resolution Steps

To re-enable a zone, press the MODE key once, (the display will go blank) you then have 10 seconds to start entering the code 3622. Next, press the [ENTER/STORE]. A flashing upper case E will appear on the left of the display. Next, press the zone number to be enabled. The number will appear on the far right display character. Press [ENTER/STORE].

Manual References(4)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

System Off NormalThe system is in a non-standard operating mode, such as Troubleshoot or Programming mode.AC Loss (shown only when requested)The AC ON indicator turns off and the trouble LED turns on when the AC line voltage drops below the Low Line threshold.Zone n disabledThe specified initiating zone has been manually disabled and will not report alarms.Ground faultThe control panel has detected that a supervised circuit, such as a zone or NAC, is in contact with earth ground.Primary Phone Line FaultThe panel has detected a loss of voltage or connection on the primary telephone line.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-5024 trouble codesMS-5024 panel page