Fire-Lite

MS-5024

The Fire-Lite MS-5024 is a small addressable fire alarm panel supporting 1 SLC loop. An economical choice for small commercial applications.

9 manuals22 trouble codesModels: MS-5024, MS-5024E, MS-5024UD

Specifications

SLC Loops

N/A (Conventional)

Panel Type

Conventional

IDC Zones

5

NAC Circuits

2

Battery (Ah)

7-17

Annunciator

Yes

Manuals

MS-5024

InstallationOperationsProgramming2002

MS-5024UD

InstallationOperationsProgramming2002

MS-5024 Field Software Change Procedure

Trouble Codes

View all 22 →

AC LossThe panel has lost AC power or the voltage has dropped below the brownout threshold.AC Loss (shown only when requested)The AC ON indicator turns off and the trouble LED turns on when the AC line voltage drops below the Low Line threshold.Annunciator FaultCommunication has been lost between the main control panel and a remote annunciator.Primary C. Number Communication Fault

Related Questions

How do I perform a walk test on the MS-5024 without triggering a full alarm?How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I program zones and assign addressable points to zones using the MS-5024 front panel keypad?

All Fire-Lite manuals →All MS-5024 trouble codes →Ask TroubleShooter AI →

Manual1996

MS-5024UD

InstallationOperationsProgramming1997

MS-5024

InstallationOperationsProgramming1997

MS-5024UD

Datasheet2004

MS-5024

Operating Instructions1994

MS-5024UD Field Software Change Procedure

Manual1998

MS-5024

Datasheet2004

Manuals That Reference This Model (4)

Device Compatibility DocumentCompatibility Chart2022 Document ChartManual2017 IPDACT-2/2UD CommunicatorDatasheet2014 RZA-5FDatasheet2004

The Digital Alarm Communicator Transmitter (DACT) failed to communicate with the primary central station.

Secondary C. Communications FaultThe Digital Alarm Communicator Transmitter (DACT) failed to communicate with the secondary central station.

DrillThe fire drill function has been manually activated to test notification appliances.

Ground faultThe control panel has detected that a supervised circuit, such as a zone or NAC, is in contact with earth ground.

Failed Up/DownloadThe panel failed to complete a remote programming upload or download session.

Ground faultThe control panel has detected a ground fault condition on the supervised field wiring or initiating device circuits.

Low batteryThe standby battery voltage is below the critical threshold required for proper operation.

How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?