FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
City Circuit Troubletrouble

Simplex 4010ES: City Circuit Trouble

Simplex 4010ES·0 views·0 field notes

What This Code Means

The city circuit connection is in a trouble state.

Common Causes

  • 1Open circuit in city tie wiring
  • 2Short circuit in city tie wiring
  • 3Disconnected city circuit module

Resolution Steps

Inspect the wiring between the panel and the city tie; ensure the city circuit module is properly seated.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.Maintenance Switch SupervisoryA maintenance switch has been activated to allow the system to be tested or serviced without actuating fire suppression.FIRE MONITOR ZONE OPEN CIRCUIT TROUBLEA trouble message used to indicate that the FACP is impaired due to a break in the electrical path of a circuit.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.Abort Switch ActiveAn abort switch has been activated, preventing the release of suppression agents.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4100ES using the Earth Fault Search?How do I troubleshoot a ground fault on the Simplex 4010ES?
All 4010ES trouble codes4010ES panel page