FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Control Point Bypasstrouble

Simplex 4010ES: Control Point Bypass

Simplex 4010ES·0 views·0 field notes

What This Code Means

One or more control points in the system have been bypassed.

Common Causes

  • 1Manual bypass for testing
  • 2Technician error
  • 3Maintenance mode active

Resolution Steps

Identify the bypassed points through the panel menu and re-enable them if testing is complete.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.Maintenance Switch SupervisoryA maintenance switch has been activated to allow the system to be tested or serviced without actuating fire suppression.FIRE MONITOR ZONE OPEN CIRCUIT TROUBLEA trouble message used to indicate that the FACP is impaired due to a break in the electrical path of a circuit.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.Abort Switch ActiveAn abort switch has been activated, preventing the release of suppression agents.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4100ES using the Earth Fault Search?How do I troubleshoot a ground fault on the Simplex 4010ES?
All 4010ES trouble codes4010ES panel page