FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Verification Tally Limit Exceededtrouble

Simplex 4010ES: Verification Tally Limit Exceeded

Simplex 4010ES·0 views·0 field notes

What This Code Means

A verified point has exceeded the tally limit of 10 activations.

Common Causes

  • 1Intermittent wiring fault
  • 2Faulty detector
  • 3Environmental interference causing repeated false triggers

Resolution Steps

Inspect the specific device and its wiring for faults; clear the tally limit once the issue is resolved.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.FIRE MONITOR ZONE OPEN CIRCUIT TROUBLEA trouble message used to indicate that the FACP is impaired due to a break in the electrical path of a circuit.Elevator BypassElevator recall control points are currently bypassed.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.TrueTest Active in SystemThe TrueTest diagnostic feature is currently active.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4010ES trouble codes4010ES panel page