FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Programming Mode - System Disabledtrouble

Simplex 4010ES: Programming Mode - System Disabled

Simplex 4010ES·0 views·0 field notes

What This Code Means

The panel is in Programming or Quick-CFIG mode and is no longer operational.

Common Causes

  • 1Technician performing system configuration

Resolution Steps

Finish the programming session and exit the configuration menu to restore system operation.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.Maintenance Switch SupervisoryA maintenance switch has been activated to allow the system to be tested or serviced without actuating fire suppression.Elevator BypassElevator recall control points are currently bypassed.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.FIRE MONITOR ZONE OPEN CIRCUIT TROUBLEA trouble message used to indicate that the FACP is impaired due to a break in the electrical path of a circuit.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4010ES trouble codes4010ES panel page