FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Warm Start / Check Time and Datetrouble

Simplex 4010ES: Warm Start / Check Time and Date

Simplex 4010ES·0 views·0 field notes

What This Code Means

The panel has performed a warm start and requires the time and date to be checked.

Common Causes

  • 1Software restart
  • 2Minor power interruption

Resolution Steps

Acknowledge the trouble and verify/update the system time and date.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.FIRE MONITOR ZONE OPEN CIRCUIT TROUBLEA trouble message used to indicate that the FACP is impaired due to a break in the electrical path of a circuit.Elevator BypassElevator recall control points are currently bypassed.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.TrueTest Active in SystemThe TrueTest diagnostic feature is currently active.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4010ES trouble codes4010ES panel page