FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Duplicate IDNet Device Detectiontrouble

Simplex 4010ES: Duplicate IDNet Device Detection

Simplex 4010ES·0 views·0 field notes

What This Code Means

The system has detected multiple devices sharing the same IDNet address.

Common Causes

  • 1Incorrect device addressing
  • 2Device replacement without address verification

Resolution Steps

Locate the devices with the duplicate address and re-address them correctly.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.Elevator BypassElevator recall control points are currently bypassed.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.Excessively DirtyThe sensor is so contaminated that it can no longer compensate for environmental factors and may not function correctly.[Point Label] DISABLED TROUBLEA point or zone has been manually inhibited from reporting alarm conditions or other status changes, typically because the device is malfunctioning or undergoing maintenance.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4010ES trouble codes4010ES panel page