FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
IDNet SLC Troubletrouble

Simplex 4010ES: IDNet SLC Trouble

Simplex 4010ES·0 views·0 field notes

What This Code Means

A communication or wiring fault exists on the IDNet signaling line circuit.

Common Causes

  • 1Short circuit on SLC
  • 2Open circuit on SLC
  • 3Excessive electrical noise

Resolution Steps

Check SLC loop voltage and wiring; inspect for T-tap issues or loose connections.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

SUPERVISORYA Supervisory condition indicates that some part of the building’s fire protection system is disabled or a lower priority initiating device has been triggered.Elevator BypassElevator recall control points are currently bypassed.IDNet Device: M#-# Battery FaultThis trouble indicates that there is a battery failure on the 4009 IDNet NAC Extender device connected to the system.Excessively DirtyThe sensor is so contaminated that it can no longer compensate for environmental factors and may not function correctly.[Point Label] DISABLED TROUBLEA point or zone has been manually inhibited from reporting alarm conditions or other status changes, typically because the device is malfunctioning or undergoing maintenance.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4010ES trouble codes4010ES panel page