Fire-Lite

MS-9600

The Fire-Lite MS-9600 is a large addressable fire alarm panel supporting up to 2 SLC loops. Commonly used in larger commercial and institutional buildings.

7 manuals18 trouble codesModels: MS-9600, MS-9600LS, MS-9600E, MS-9600UDLS

Specifications

SLC Loops

1 (expandable to 2)

Panel Type

Addressable

NAC Circuits

4 Class B / 2 Class A

Total Points

636 (LiteSpeed) / 396 (CLIP)

Points/Loop

318 (LiteSpeed) / 198 (CLIP)

Battery (Ah)

7-120

Annunciator

Yes

Manuals

MS-9600LS and MS-9600UDLS

InstallationOperationsProgramming2015

MS-9600 and MS-9600E

InstallationOperationsProgramming2008

Trouble Codes

View all 18 →

AC LOSSThe control panel has lost its primary AC power supply and is currently operating on standby batteries.AC PowerThe control panel has lost its primary 120VAC or 240VAC power source.ACTIVE SUPERVISORYA condition indicating a state that needs attention but is not an alarm, such as a sprinkler valve tamper condition.ALARM SILENCED

MS-9600

The Fire-Lite MS-9600 is a large addressable fire alarm panel supporting up to 2 SLC loops. Commonly used in larger commercial and institutional buildings.

7 manuals18 trouble codesModels: MS-9600, MS-9600LS, MS-9600E, MS-9600UDLS

Specifications

SLC Loops

1 (expandable to 2)

Panel Type

Addressable

NAC Circuits

4 Class B / 2 Class A

Total Points

636 (LiteSpeed) / 396 (CLIP)

Points/Loop

318 (LiteSpeed) / 198 (CLIP)

Battery (Ah)

7-120

Annunciator

Yes

Manuals

MS-9600LS and MS-9600UDLS

InstallationOperationsProgramming2015

MS-9600 and MS-9600E

InstallationOperationsProgramming2008

Trouble Codes

View all 18 →

AC LOSSThe control panel has lost its primary AC power supply and is currently operating on standby batteries.AC PowerThe control panel has lost its primary 120VAC or 240VAC power source.ACTIVE SUPERVISORYA condition indicating a state that needs attention but is not an alarm, such as a sprinkler valve tamper condition.ALARM SILENCED

Related Questions

How do I add a remote annunciator to the MS-9600?What does 'SLC Open Fault' mean on the MS-9600 and how do I clear it?How do I program the MS-9600 using PS-Tools?What communicator options are available for the MS-9600 — does it have a built-in DACT?

All Fire-Lite manuals →All MS-9600 trouble codes →Ask TroubleShooter AI →

MS-9600LS and MS-9600UDLS

Datasheet2019

Manuals That Reference This Model (33)

ECC-50/100 and ECC-50/100EInstallationOperationsProgramming2014 ACC-25/50InstallationOperationsProgramming2010 ACM-8RFInstallationProgramming2001 Device Compatibility DocumentCompatibility Chart2022 CHG-120FInstallationOperations2001 DACT-UDInstallationOperationsProgramming2005 UDACT-FInstallationOperationsProgramming2001 BG-12LXDatasheet2012 MMF-302-6Installation2008 CHG-75InstallationOperationsProgramming2001 ACM-16ATF and ACM-32AFInstallationOperationsProgramming2001 ECC-50/100Datasheet2018 ECC-FFTDatasheet2015 ANN-I/ODatasheet2018 Document ChartManual2017 VisorALARM PLUS 2UInstallation2007 PS-Tools for the 198 Pt Addr PanelUser Guide2010 IPDACT-2/2UD CommunicatorDatasheet2014 OSI-RI-FLDatasheet2020 Fire SolutionsBrochure2018 PS-Tools for the 50 Pt Addr PanelUser Guide2010 Central Station TransmitterInstallation2006 MMF-300-10Installation2008 ECC-50/100C Command CtrDatasheet2015 W-BG12LX and W-BG12LXSPDatasheet2018 IPDACTInstallationOperations2007 W-GATEDatasheet2018 CRF-300-6InstallationProgramming2008 W-MMF & W-CRFDatasheet2018 PS-Tools for the 636 Pt Addr PanelUser Guide2010 PRN-7Installation2015 PK-9600UDDatasheet2001 CMF-300-6Datasheet2015

This condition indicates that the notification appliance circuits (NACs) have been manually turned off by pressing the Alarm Silence key while an alarm condition is still active.

AUTO TEST FAILA smoke detector failed its automatic functional test performed by the panel every two hours.

Battery FaultThe system has detected an issue with the standby batteries or their connection.

Charger FaultThe internal battery charging circuit is not functioning correctly.

DISABLIndicates that a zone, NAC, detector, or module has been temporarily disabled in programming by the user.

Duplicate AddressThe system has detected more than one device sharing the same SLC address.

EARTH FAULTA ground fault condition indicating zero impedance between the Fire Alarm Control Panel and ground.

What batteries does the MS-9600 use?

MS-9600LS and MS-9600UDLS

Datasheet2019

Manuals That Reference This Model (33)

ECC-50/100 and ECC-50/100EInstallationOperationsProgramming2014 ACC-25/50InstallationOperationsProgramming2010 ACM-8RFInstallationProgramming2001 Device Compatibility DocumentCompatibility Chart2022 CHG-120FInstallationOperations2001 DACT-UDInstallationOperationsProgramming2005 UDACT-FInstallationOperationsProgramming2001 BG-12LXDatasheet2012 MMF-302-6Installation2008 CHG-75InstallationOperationsProgramming2001 ACM-16ATF and ACM-32AFInstallationOperationsProgramming2001 ECC-50/100Datasheet2018 ECC-FFTDatasheet2015 ANN-I/ODatasheet2018 Document ChartManual2017 VisorALARM PLUS 2UInstallation2007 PS-Tools for the 198 Pt Addr PanelUser Guide2010 IPDACT-2/2UD CommunicatorDatasheet2014 OSI-RI-FLDatasheet2020 Fire SolutionsBrochure2018 PS-Tools for the 50 Pt Addr PanelUser Guide2010 Central Station TransmitterInstallation2006 MMF-300-10Installation2008 ECC-50/100C Command CtrDatasheet2015 W-BG12LX and W-BG12LXSPDatasheet2018 IPDACTInstallationOperations2007 W-GATEDatasheet2018 CRF-300-6InstallationProgramming2008 W-MMF & W-CRFDatasheet2018 PS-Tools for the 636 Pt Addr PanelUser Guide2010 PRN-7Installation2015 PK-9600UDDatasheet2001 CMF-300-6Datasheet2015

This condition indicates that the notification appliance circuits (NACs) have been manually turned off by pressing the Alarm Silence key while an alarm condition is still active.

AUTO TEST FAILA smoke detector failed its automatic functional test performed by the panel every two hours.

Battery FaultThe system has detected an issue with the standby batteries or their connection.

Charger FaultThe internal battery charging circuit is not functioning correctly.

DISABLIndicates that a zone, NAC, detector, or module has been temporarily disabled in programming by the user.

Duplicate AddressThe system has detected more than one device sharing the same SLC address.

EARTH FAULTA ground fault condition indicating zero impedance between the Fire Alarm Control Panel and ground.

What batteries does the MS-9600 use?