Simplex 4010ES Questions
Questions and answers specific to the Simplex 4010ES.
Sign in to ask a question
Questions and answers specific to the Simplex 4010ES.
To add IDNet devices, connect them to the IDNet signaling line circuit (SLC) on the Main System Supply (MSS) or an optional IDNet 2+2 module. The system...
The Simplex 4010ES supports four on-board notification appliance circuits (NAC1 through NAC4) (Page 64) [1]. NAC Specifications: Each circuit is rated for 3 A...
To perform a WalkTest on the Simplex 4010ES, you must enable a test group from the front panel and manually trigger devices. The 4010ES supports up to eight...
To connect the 4010ES to central station monitoring, install an optional Serial DACT (PID 4010-9912) or City Connect module. The DACT provides point-specific...
The 4010ES requires a pair of 12V sealed lead-acid batteries wired in series for 24V backup power (Page 53) [1]. The maximum battery capacity that can be...
Yes, the 4010ES is compatible with ES Net and can be networked with 4100ES panels (Page 1) [1]. To enable this functionality, you must install an ES Net...
To program the 4010ES, connect a PC to the panel and use the ES Panel Programmer software to configure hardware and point logic. 1. Connect a laptop to the...
The 4100ES is a modular, high-capacity system designed for large-scale networking and integrated emergency voice/alarm communications, whereas the 4010ES is a...
The Simplex 4010ES supports a maximum capacity of 998 addressable IDNet points (Page 1) [1]. The base system includes one IDNet+ channel on the Main System...
To troubleshoot a ground fault on the 4010ES, use the built-in Earth Fault Search diagnostic to isolate the fault to a specific circuit or IDNet segment (Page...