FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
003
trouble

Kidde Aegis 2.0

56 views·0 field notes

What This Code Means

Primary Power Supply Unit (PSU) Output Voltage fault

Common Causes

  • 1Loose power supply connector
  • 2Failed PSU assembly
  • 3Main PCB fault

Resolution Steps

Check power supply connector from the power supply to main PCB; replace the power supply assembly if necessary.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

027ARC 2 Not Open Circuit (Unexpected load detected)020Notification Appliance Circuit (NAC) 3 short circuit002AC Voltage is below 85% of nominal001 GroundThe control unit has detected an unintended connection to earth ground on the field wiring.039NAC #3 Output Disabled (Pseudo-Trouble)

Related Questions

How do I program the Kidde Aegis 2.0 cross-zone detection so that two circuits must activate before the releasing circuit fires?What is the correct procedure to test the manual release function on the Aegis 2.0 without discharging the agent?What is the difference between Abort Mode 1 (UL 864) and Abort Mode 3 (IRI) on the Aegis 2.0?
All Aegis 2.0 trouble codesAegis 2.0 panel page