Kidde

Aegis 2.0

The Kidde Aegis 2.0 is an addressable fire alarm control panel with advanced features for mid-size commercial applications. Part of the Kidde commercial fire detection line.

2 manuals40 trouble codesModels: Aegis 2.0, Aegis II, VS4095/9, VS4095/9E

Specifications

SLC Loops

N/A (Conventional)

Panel Type

Conventional (Suppression Release)

IDC Zones

3 detection + 2 supervisory

NAC Circuits

3

Battery (Ah)

12-68

Manuals

AEGIS 2.0

InstallationOperationsProgramming2015

AEGIS 2.0

Datasheet2016

Trouble Codes

View all 40 →

trbMicroprocessor or PCB failure 001 GroundThe control unit has detected an unintended connection to earth ground on the field wiring.002AC Voltage is below 85% of nominal 003Primary Power Supply Unit (PSU) Output Voltage fault

Related Questions

How do I program the Kidde Aegis 2.0 cross-zone detection so that two circuits must activate before the releasing circuit fires?What is the correct procedure to test the manual release function on the Aegis 2.0 without discharging the agent?What is the difference between Abort Mode 1 (UL 864) and Abort Mode 3 (IRI) on the Aegis 2.0?

All Kidde manuals →All Aegis 2.0 trouble codes →Ask TroubleShooter AI →

004No secondary power (battery) connected or detected

005Battery charger fault

Low BatteryThis condition indicates that the battery voltage has fallen below the required threshold for reliable standby operation.

007Reversed battery polarity

008Detector Circuit #1 open circuit

009Detector Circuit #2 open circuit

What end-of-line resistor values does the Aegis 2.0 require for its detection and releasing circuits?

What trouble conditions cause the Aegis 2.0 to display a PR1 trouble code, and how do I clear it?