FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
005trouble

Kidde Aegis 2.0: 005

Kidde Aegis 2.0·0 views·0 field notes

What This Code Means

Battery charger fault

Common Causes

  • 1PCB charging circuit failure
  • 2Power supply output voltage error
  • 3Defective battery

Resolution Steps

Measure Power Supply voltage (27.6 Vdc) at PSU J2. If correct, replace PCB. If not correct, replace power supply.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

022Agent Release Circuit (ARC) 2 open circuit027ARC 2 Not Open Circuit (Unexpected load detected)004No secondary power (battery) connected or detected002AC Voltage is below 85% of nominalBattery DisconnectAutomatic battery disconnection due to critical low voltage

Related Questions

How do I configure the Kidde FX-10 to pair IDC zones for Class A wiring?What is the difference between Abort Mode 1 (UL 864) and Abort Mode 3 (IRI) on the Aegis 2.0?How do I set up zone-specific NAC activation on the FX-10 so that only certain horns/strobes activate for specific zones?
All Aegis 2.0 trouble codesAegis 2.0 panel page