FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
030trouble

Kidde Aegis 2.0: 030

Kidde Aegis 2.0·0 views·0 field notes

What This Code Means

NAC 3 Not Open Circuit (Unexpected load detected)

Common Causes

  • 1Circuit or EOL connected when configured as unused
  • 2Configuration error

Resolution Steps

Ensure that the NAC 3 Circuit is not connected and EOL is not used, or change the system configuration.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

027ARC 2 Not Open Circuit (Unexpected load detected)002AC Voltage is below 85% of nominal003Primary Power Supply Unit (PSU) Output Voltage fault007Reversed battery polarity004No secondary power (battery) connected or detected

Related Questions

How do I configure the Kidde FX-10 to pair IDC zones for Class A wiring?What is the difference between Abort Mode 1 (UL 864) and Abort Mode 3 (IRI) on the Aegis 2.0?How do I set up zone-specific NAC activation on the FX-10 so that only certain horns/strobes activate for specific zones?
All Aegis 2.0 trouble codesAegis 2.0 panel page